Band bending at the conducting polymer/indium tin oxide interfaces with and without ultraviolet treatment

In this study, the effect of ultraviolet treatment on the band bending at the poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate)/indium tin oxide (PEDOT:PSS/ITO) interfaces were researched. The authors suggested that ultraviolet treatment could lead to a reduction in the band bending at the PEDOT:PSS/ITO interface, owing to the removal of carbon contamination at the ITO surfaces and a decrease in the number of the trap-states at the PEDOT:PSS/ITO interface.     

Load’s temporal characteristics for annulling forced vibrations of linear elastic plates

We consider trapezoidal load-time pulses with linearly increasing and affinely decreasing durations equal to integer multiples of the time period of the first bending mode of vibration of a linearly elastic structure. For arbitrary spatial distributions of loads applied to monolithic and laminated orthotropic plates, it is shown through numerical solutions that plates’ vibrations become miniscule after the load is removed. This phenomenon is independent of the dwell time (i.e., the time duration between the rising and the falling portions) during which the load is kept constant. The primary reason for this response is that for such time-dependent loads, nearly all of plate’s strain energy is concentrated in deformations corresponding to the fundamental bending mode of vibration. Thus plate’s deformations can be studied by taking the mode shape of the 1st bending mode as the basis function and reducing the problem to that of solving a single second-order ordinary differential equation. We have verified this postulate by comparing strain energies computed from the 3-dimensional deformations of different plate geometries and boundary conditions with those determined by using the single degree of freedom (DoF) model. Thus for trapezoidal time-dependent loads applied on plates, the 1 DoF model provides reasonably accurate results and saves considerable computational effort.     

LOCAL BENDING OF THIN FILM ON VISCOUS LAYER

Effects of deposition layer position film are systematically investigated. Because the and number/density on local bending of a thin deposition layer interacts with the thin film at the interface and there is an offset between the thin film neutral surface and the interface, the deposition layer generates not only axial stress but also bending moment. The bending moment induces an instant out-of-plane deflection of the thin film, which may or may not cause the socalled local bending. The deposition layer is modeled as a local stressor, whose location and density are demonstrated to be vital to the occurrence of local bending. The thin film rests on a viscous layer, which is governed by the Navier-Stokes equation and behaves like an elastic foundation to exert transverse forces on the thin film. The unknown feature of the axial constraint force makes the governing equation highly nonlinear even for the small deflection chse. The constraint force and film transverse deflection are solved iteratively through the governing equation and the displacement constraint equation of immovable edges. This research shows that in some special cases, the deposition density increase does not necessarily reduce the local bending. By comparing the thin film deflections of different deposition numbers and positions, we also present the guideline of strengthening or suppressing the local bending.     

Coherent communications

Abstract

Coherent lightwave techniques, when compared to direct detection techniques, offer nearly quantum noise limited sensitivity as well as fine tunability similar to that obtained at radio frequencies. These two aspects provide communication systems planners and engineers the means to better exploit the huge bandwidth of single mode optical fibers.

Research activity in this field started in the early 1980s, and some laboratory experiments and field trials were performed by the end of the decade, showing that such techniques are suitable for transmitting multigigabit per second signals to distances well exceeding hundred kilometers. On the other hand, coherent multichannel, frequency division multiple access, local area networks have been proposed and experimented worldwide.

This article will discuss the theoretical advantages and limitations of the various modulation and detection formats together with the state of the art. Moreover, some aspects, related to the introduction of coherent systems in local and metropolitan area networks, will be treated. Finally some experimental data will be provided and future evolution will be discussed.     

Annealing effect in glass woven fabric composites,Part II. Bending properties

Effects of annealing on bending properties of composites reinforced with plain glass woven fabrics that were treated with different concentrations of silane coupling agent were investigated in this paper. Bending strength increased by annealing in the specimen treated with lower silane concentration. Higher annealing temperature in a range from 80°C to 150°C led to higher bending strength. Then, the fracture mode changed from a micro-crack type (low strength type) to a branched matrix crack type (high strength type) by annealing.     

基于视频图像测量的母线折弯技术研究

现有折弯机在母线的角度测量中一般采用光栅尺或编码器,针对这种接触式检测方法存在的局限性,提出了基于视频技术的角度检测方法,这种非接触式测量方法不仅使角度的检测更加方便,而且增加了折弯机机头机械设计的灵活性.分析了母线在进行边缘检测时角度存在跳动的原因,提出了一种通过抑制伪边缘的方法来控制检测角度的不稳定性.以铜、铝母线...     

Analysis of Compression Stress of a Filler and Bending of a Sandwich Panel under Multipoint Loading

The distribution of transverse stresses in the midlayer of a composite sandwich panel under multipoint loading is investigated. The stresses averaged across the thickness of a soft filler are estimated using a discrete model. Finite expressions for the compression of the filler along the length of the panel are derived by means of superposition of the local effects from the bending of face layers under an infinite system of transverse point forces constant across the panel thickness. The effects of compression and transverse extension of the filler, in the case of a high distribution frequency of these forces, i.e., when the distance between the forces is comparable to the panel thickness, are revealed. Compression of the panel by two systems of forces applied symmetrically or nonsymmetrically to the upper and lower faces is considered. The bending characteristics in the cases of loading with point forces and piecewise distributed loads are compared. The formulas obtained are used to determine the length of a small region on the panel surface for which the local effects from the distributed pressure and the point force are equivalent. The corresponding estimates are obtained in a closed form. The analysis, carried out with varied parameters of the structure, allows us to elucidate the peculiarities of the effect of discontinuous loads on the design characteristics in the local zones, using finite expressions derived by the operational method.     

Study of Polymer-Cement Composite Containing Portland Cement and Aqueous Poly (methyl methacrylate) Latex Polymer by Fourier-Transform Infrared (FT-IR) Spectroscopy

The polymer-cement composite is an immiscible band having modified morphology. Polymer phase improves the toughness of brittle cement and has a reinforcing effect, and interactions between cement components and polymers provide stability. In this study, polymer latex [poly(methyl methacrylate), PMMA] – cement paste was prepared with different weight proportions of polymer content. The main scientific objective of this report has been the analysis and the prediction of high strength with the aim of understanding the interactions of PMMA polymer with Portland cement after hydration reaction of cement pastes and curing the specimens for 28 days. The samples were studied by Fourier transform infrared (FT-IR) spectroscopy. The results are critically examined. It is shown that bands support the interaction of PMMA with cement in the composite.     

K9光学玻璃化学钢化技术研究

为提高K9光学玻璃在一些特殊应用领域（如高压、温度变化剧烈等）的力学性能,并保证其光学性能符合精密光学仪器要求,对K9光学玻璃进行了化学钢化技术研究。以脆性材料断裂过程微裂纹扩展理论为基础,导出化学钢化玻璃强度应力因子计算模型,分析化学钢化表面应力与表面微裂纹深度、韧性之间的关系,指出化学钢化工艺应注意的事项。通过实验研究,分析化学钢化温度和钢化时间对K9光学玻璃抗弯强度、表面应力及应力层厚度的影响,优化得出K9光学玻璃化学钢化温度为400 ℃、钢化时间为40 h。采用优化工艺,获得了表面应力为500 MPa、应力层厚度为50 μm量级及规格为220 mm×110 mm×22 mm的化学钢化K9光学玻璃样件。钢化后,样件抗弯强度提高了3.5倍以上,且表面疵病、光学鉴别率、透过率等光学性能指标未见明显变化。     

Ozone‐Induced Band Bending on Metal‐Oxide Surfaces Studied under Environmental Conditions

Ozone adsorption and decomposition on metal oxides is of wide interest in technology and in atmospheric chemistry. Here, ozone‐adsorption‐induced band bending is observed on Ti‐ and Fe‐oxide model surfaces under dry and humid conditions. Photoelectron spectroscopic studies indicate the effect of charge transfer to O₃, which limits the surface coverage of the precursor to decomposition reactions. This is also consistent with the negative pressure dependence observed in previous studies. These results contribute to our fundamental understanding of ozone adsorption and decomposition mechanisms on metal oxides of environmental and technological relevance.